Forums/Licensed Products/GigaPlus

GigaPlus Software 1.3.3 Release

Scott Chester
posted this on December 16, 2011 11:25 am

Bug Fixes

  1. TDM counter retrieval which previously could have caused a crash in the command server, resulting in management unresponsiveness. Does not impact Eth only datapath.
  2. New T1/E1 binary files for reduced voltage. Voltage should be ~5.4 volts peak-to-peak now. Note: Because of binary change, radios will not link with different firmware.
  3. FTP operations restored which had not been included in the 1.3.2 release.
  4. Exit from CLI view node is not a permitted command. Previously this would cause future telnet sessions to be rejected.
Requirements
  • Upgrade from 1.3.0 may be done via FTP to TFTP.
  • Upgrade from 1.3.2 must be done via TFTP.
  • For older software, please upgrade to 1.3.0 or 1.3.2 prior to upgrading to 1.3.3. 
  • This release does not include a PIC image to eliminate the possibility of a PIC upgrade failure and PIC 60 and 62 are both supported.
Condensed instructions: (detailed instructions are available in the release notes)
  1. Transfer the image upgrade file to the radio. (Do not un-tar the file.) Either download the file from here and transfer with TFTP, or pull it directly from our FTP server.
  2. Issue cli command <bootimage upgrade idu>
  3. Reboot the IDU.